☎ +91 98226 95746WhatsApp11:00 – 19:00 IST
Request a quote
SMARTHT-IP

Fibre-Optic Hotline Telephone System

Point-to-point ring-down hotline over single-mode fibre between two sites

Single-mode fibre10 km1310/1550 nm
Datasheet · PDF 72 KB

1 / 2

Ask an engineer about HT-IP on WhatsApp →

Environment
Indoor
Interface
Fibre

Ideal for

  • Control room to remote site hotlines
  • Long-distance plant links
  • Sites up to 10 km apart on fibre

What it does

For hotlines that run too far for copper. Two desktop phones each connect on one pair to a SMART IP controller, and the controllers link over single-mode optical fibre. Lift either handset and the far end rings until answered; replace both handsets and the line resets.

  1. 01

    Automatic ring-down: lift to ring the far end

  2. 02

    Full-duplex conversation

  3. 03

    Controllers linked by single-mode fibre, up to 10 km

  4. 04

    Phones on non-critical telephone cable to each controller

  5. 05

    Resets automatically when both handsets are replaced

Specifications

Electrical · 3
Ring voltage70 Vrms at 20 Hz
FXS output impedance600 Ω
Power supply230 V AC
Acoustic · 3
Audio bandwidth300 Hz to 3.4 kHz
Input range1.5 to -40 dBm (2/4-wire 600 Ω)
SNR32 to 36 dB
Environmental · 1
Humidity95% non-condensing
Connectivity · 6
Optical transmitterLED/ELED
Optical receiverPIN diode
WavelengthTx/Rx 1310/1550 nm or 1550/1310 nm
Fibre typeSingle mode 8.3/125, 8.7/125, 9/125 or 10/125 µm
DistanceUp to 10 km
Phone connectorRJ11 female

Compare with similar models

Differences first: interface, power, protection and output, then installation. Full specifications are in each model's table.

Comparison of HT-IP with similar models. Rows that differ come first; “Not specified” means the datasheet does not list it.
SpecificationHT-IP
Fibre-Optic Hotline Telephone System
HT-I
Hotline System with Normal Phones
HT-A
Hotline PA Telephone System
InterfacediffersFibreStand-aloneStand-alone
Power supplydiffers230 V AC220 V AC (controller)220 / 110 V AC (controller and each hotline PA telephone)
CablediffersNot specifiedSingle pair wireSingle pair (2-core telephone cable) to controller; long loop up to 1 km of 2-core 0.5 sq mm
Battery backupdiffersNot specifiedBuilt-in, continuous online UPSOnline built-in
PhonesdiffersNot specifiedUp to 4 normal desktop phonesTwo desktop hotline PA telephones
EnvironmentIndoorIndoorIndoor

Part of a system

Hotline network

Direct lines with no dialling, from control rooms to the posts that need an answer now. Three SMART hotlines cover one pair of copper, PA paging on pick-up, and single-mode fibre between sites.

How the system works

Downloads

PDFSMART HT-IP datasheet72 KB

Questions

How far can the two ends be?

Up to 10 km over single-mode fibre, as stated in the product description.

Need HT-IP for a project?

Tell us the quantity, the plant and the timeline. We reply with a quotation.

Go to quote list
WhatsApp